Nokia M11 T66220 User Manual page 105

Nokia M11 User's Manual
Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
5-50
Set payload encapsulation for specific ATM chan-
nel
Defines how the payload is encapsulated to the speci-
fied logical ATM channel.
set atm vcc [1 | 2 | 3 | 4 | 5 | 6 | 7 | 8] encap [ip-llc | ip-
vcmux | ether-llc | ether-vcmux | ppp-vcmux | ppp-llc]
The first argument 1|2|3|4|5|6|7|8 specifies the
channel and the second argument sets the encapsula-
tion. The ip-llc and ether-llc encapsulations are
according to RFC 1483 with LLC/SNAP encapsulation
for IP and Ethernet frames, respectively. The ip-
vcmux and ether-vcmux encapsulation are vc-multi-
plexed according to RFC 1483 for IP and Ethernet
frames, respectively. In ppp-vcmux encapsulation both
bridged and routed protocols are first encapsulated to
point-to-point protocol (PPP) which is, in turn, encapsu-
lated to ATM according to RFC 1483 vc-multiplexing.
ppp-llc is PPP over ATM, LLC/NLPID encapsulation.
M11> set atm vcc 2 encap ip-llc
Set transmit priority
Sets transmit priorities to VCCs. The channel with high
priority gets more upstream bandwidth than low priority
channel.
set atm [vcc x] tx-priority [high|low] tx-max-kbps [0 –
1000]
The tx-priority argument sets the priority of the
VCC to high or low. The tx-max-kbps argument de-
fines the maximum transmit rate of the VCC.
m11> set atm vcc 1 tx-priority high tx-
max-kbps 400
E Copyright Nokia Networks Oy
C33833001SE_00