Bridging Settings - Nokia M11 T66220 User Manual

Command
Description
Syntax
Arguments
Example

Bridging settings

Bridging lets Nokia M11 learn host addresses to minimise traffic.
When bridging is enabled M11 maintains a table of up to 256 MAC
addresses. Entries that are not used within 10 minutes are dropped. If
the bridging table fills up, the oldest table entries are dropped to make
room for new entries.
Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
C33833001SE_00
Set IP address of secondary name server
Specifies the IP address of the secondary DNS name
server.
set dns secondary-address [ip_address]
ip_address is the IP address of your secondary
name server. Enter 0.0.0.0 if your network does not
have a secondary DNS name server.
M11> set dns secondary-address 0.0.0.0
Enable/disable bridging
Enables/disables bridging services in M11. You must
enable bridging services within M11 before you can en-
able it for a specific interface.
set bridge option [on|off]
The argument enables/disables bridging.
M11> set bridge option on
Enable bridging for Ethernet interface
Enables/disables bridging services for the M11 Ethernet
interfaces.
set bridge ethernet option [on|off]
The argument enables/disables bridging for Ethernet
interfaces.
M11> set bridge ethernet option on
E Copyright Nokia Networks Oy
Management
5-77