Nokia M11 T66220 User Manual page 136

Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
C33833001SE_00
Set unacknowledged termination request maximum
Specifies the maximum number of unacknowledged
termination requests that your M11 will send before ter-
minating the PPP link on the specified ATM channel.
set ppp module {vccx} terminate-max [integer]
The first argument identifies the ATM channel (vccx,
x = 1 ... 8). The integer argument can be any number
between 1 and 10.
M11> set ppp module vcc2 terminate-max 2
Set PPP timeout
Specifies the number of seconds M11 must wait for
communication activity before terminating the PPP link
on the specified ATM channel.
set ppp module {vccx} timeout [integer]
The first argument identifies the ATM channel (vccx,
x = 1 ... 8). The integer argument is the timeout in
seconds. If you enter value 0, the connection will never
time out.
M11> set ppp module vcc2 timeout 0
Enable/disable CHAP port authentication
Enables/disables CHAP authentication for a port on the
specified ATM channel. CHAP authentication must be
enabled before you can enter other CHAP information.
If CHAP is on, it will be the first authentication method
offered to a remote peer during link negotiation.
set ppp module {vccx} port-authentication chap-option
[on|off]
The first argument identifies the ATM channel (vccx,
x = 1 ... 8). The second argument enables/disables
CHAP port authentication.
M11> set ppp module vcc2 port-authentica-
tion chap-option on
E Copyright Nokia Networks Oy
Management
5-81