Nokia M11 User's Manual
Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
5-72
Modify default gateway for static route
Specifies the IP address of the gateway for the static
route.
set ip static-routes destination-network [net_address]
gateway-address [gate_address]
The net_address argument identifies the static route
and gate_address sets the IP address of the default
gateway.
M11> set ip static-routes destination-
network 192.111.122.0 gateway-address
192.111.1.1
Modify metric for the static route
Specifies the metric for the static route.
set ip static-routes destination-network [net_address]
metric [integer]
The net_address argument identifies the static route.
The default metric is 1. Enter a number from 1 to 16 for
the integer argument to indicate the number of
routers (actual or best guess) a packet must traverse to
reach the remote network. You can enter a metric of 1
to indicate either: The remote network is one router
away and the static route is the best way to reach it;
The remote network is more than one router away but
the static route should not be replaced by a dynamic
route, even if the dynamic route is more efficient. Metric
16 indicates that the route is disabled.
M11> set ip static-routes destination-
network 192.111.122.0 metric 3
Delete static route (Note: Deleting a static route re-
moves all information associated with that route.)
Deletes a static route.
delete ip static-routes destination-network [net_ad-
dress]
net_address is the destination network address of
the static route.
M11> delete ip static-routes destination-
network 192.111.122.0
E Copyright Nokia Networks Oy
C33833001SE_00