Validating Your Configuration; Config Command Reference - Nokia M11 T66220 User Manual

M11 (top)>> set system
Stepping set mode (press Control-X <Enter> to exit)
system
name ("M11"): Kutoja
Diagnostic Level (High): medium
Stepping mode ended
See Chapter 4 for step mode installation examples.

Validating your configuration

You can use the
configuration settings have been entered correctly. If you use the
validate
present and that the settings are consistent.
M11 (top)>> validate
Error: Subnet mask is incorrect
Global Validation did not pass inspection!
You can use the
settings at any time. Your M11 automatically validates your
configuration any time you save a modified configuration.

Config command reference

The top level configuration command nodes are listed below:
D
system
D
preference
D
dmt
D
atm
D
bncp
D
ip
D
location
D
dhcp
D
dns
D
bridge
D
snmp
D
ppp
D
pinhole
D
servers
The sections below explain the commands under each top level
configuration node.
C33833001SE_00
validate
command, M11 verifies that all required settings are
command to verify your configuration
validate
M11 system options
CLI preferences
DMT (ADSL) option
ATM options
BNCP options
TCP/IP options
Location Manager options
DHCP options
DNS options
Bridge options
SNMP options
PPP options
NAT/NAPT server configuration
Local integrated server configuration
E Copyright Nokia Networks Oy
command to make sure that your
Management
5-45