Management; Dedicated Management Channel - Nokia M11 T66220 User Manual

Nokia M11 User's Manual

Management

There are four management methods in M11:
D
Command line interface (CLI) through console serial port
D
CLI via telnet
D
SNMP
D
Web browser management
The CLI allows complete configuration of the unit; the Web browser
management allows the configuration of the most frequently used
configuration parameters. SNMP can be used to read some equipment
identity information and to provide traps for authentication failures.

2.2.1 Dedicated management channel

The operator or Internet Service Provider can establish a dedicated
management channel to M11. This channel provides access to the M11
management (with telnet or Web browser) and it can be used to upload
a new software to M11. When the management channel is in use it
prevents data traffic between the management channel and the
Ethernet as well as the traffic between the management channel and
other active ATM channels. Figure 2-5 shows the principle of the
dedicated management channel.
In Figure 2-5 VCC1 is used for customers data transmission.
Administration through this channel has been disabled. The operator
or the service provider uses the VCC2 for management purposes only.
2-8
E Copyright Nokia Networks Oy
C33833001SE_00