Config Prompt; Navigating The Config Hierarchy - Nokia M11 T66220 User Manual

Nokia M11 User's Manual

Config prompt

You reach the configuration mode of the M11 CLI by typing
the Root prompt. When you are in Config mode, the CLI prompt
consists of the name of your M11 followed by your current node in the
hierarchy and two angle brackets (>>). For example, when you enter
Config mode (by typing
prompt reminds you that you are at the top of the Config
(top)>>
hierarchy. If you move to the
typing at the Config prompt), the prompt changes to
ip
identify your current location.

Navigating the Config hierarchy

You start at the
interface reminds you of your location by showing your current node
after the M11 name:
M11 (top)>>
D
Moving from Config to Root
You can navigate from anywhere in the Config hierarchy back to
the Root level by issuing the
command prompt and pressing
M11 (top)>> quit
M11>
D
Moving from top to a subnode
You can navigate from the top node to a subnode by entering the
node name (or the significant letters of the node name) at the
Config prompt and pressing Enter. For example, you move to the
ip subnode by entering
M11 (top)>> ip
M11 (ip)>>
As a shortcut, you can use the significant letters of the node in
place of the full node name at the Config prompt. The significant
characters of a node name are the letters that uniquely identify the
node. For example, only the
could enter one letter (a) to move to the atm node.
M11 (top)>> a
M11 (atm)>>
5-42
config
ip
when you enter Config mode. The command line
top
and pressing Enter.
ip
E Copyright Nokia Networks Oy
at the Root prompt), the
node in the Config hierarchy (by
command at the Config
quit
.
ENTER
Config node starts with a, you
atm
at
config
M11
to
M11 (ip)>>
C33833001SE_00