Table of Contents
Advertisement
Command
Description
Syntax
Arguments
Example
Note
The password goes into effect immediately. You have to save the
configuration but you do not have to restart the M11 for the password
to take effect. Assigning a password to M11 does not affect
communications through the device.
C33833001SE_00
Set password
Specifies the administrator, user-administrator, or user
password for a Nokia M11. When you issue the set
system password command, you are prompted to
repeat the new password to verify that you entered it
correctly the first time. To prevent anyone from observ-
ing the password you enter, characters in the old and
new passwords are not displayed as you type them. A
password can be as many as eight alphanumeric char-
acters. Passwords are case-sensitive and cannot in-
clude special characters or leading, trailing, or em-
bedded spaces. For example, if you assign a password
of "NokiA" to an M11, you could not enter "NOKIA",
"nokia", "Nokia", or "Nokia " (with a trailing space) as an
acceptable password.
set system password [admin | user-admin | user]
Arguments admin, user-admin and user specify
whether administrator, user-administrator or user pass-
word will be set. User password gives only viewing
rights. User-admin password gives rights to change
PAP and CHAP usernames and passwords and confi-
gure pinhole settings. You must set an admin password
before you can set user or user-admin passwords.
M11> set system password admin *****
E Copyright Nokia Networks Oy
Management
5-47
Advertisement
Table of Contents
