Dhcp Settings - Nokia M11 T66220 User Manual

Nokia M11 User's Manual

DHCP settings

As a Dynamic Host Control Protocol (DHCP) server, your Nokia M11
can assign IP addresses and provide configuration information to other
devices on your network dynamically. A device that acquires its IP
address and other TCP/IP configuration settings from M11 can use the
information for 30 minutes (this is known as the DHCP lease).
Note
If you use M11 as a DHCP server, make sure that the devices on your
network are not configured to use IP addresses in Nokia M11's DHCP
address range. Network conflicts can result when a device on your
network uses an IP address that M11 has already assigned to another
device.
Command
Description
Syntax
Arguments
Example
5-74
Set DHCP service
Sets DHCP services in M11. You must enable DHCP
services before you can enter other DHCP settings for
M11. If you turn off DHCP services and save the new
configuration, M11 clears its DHCP settings. M11 can
also relay DHCP requests to another server
set dhcp option [off | server | relay-agent] start-address
[ip_address] end-address [ip_address] lease-time [time]
The first argument disables DHCP (off), enables M11
DHCP server (server) or makes M11 act as a relay
agent (relay-agent).
start-address and end-address arguments define
the DHCP address range.
lease-time argument defines how often the PC has
to renew its DHCP lease.
M11> set dhcp option server start-address
192.168.1.1 end-address 192.168.1.254
lease-time 00:01:00:00
E Copyright Nokia Networks Oy
C33833001SE_00