Nokia M11 T66220 User Manual page 144

Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
C33833001SE_00
Set protocol
Configures the protocol.
set pinhole name [name] protocol-select [protocol]
The name argument defines the unique pinhole entry
name. The protocol-select argument defines the
protocol. Protocols are TCP, UDP, ICMP, PPTP.
M11> set pinhole name web-server proto-
col-select tcp
Set external protocol port number range for WAN
Sets the the external protocol port number range.
set pinhole name [name] external-port-start
[port_number] external-port-end [port_number]
The name argument defines the unique pinhole entry
name. The port_number argument defines the start
and end of the external port range. Valid values are
0 – 65535.
M11> set pinhole name web-server exter-
nal-port-start 80 external-port-end 80
Set server IP address in LAN
Configures the server IP address where the protocol
defined by the external port number is mapped in LAN
port.
set pinhole name [name] internal-ip [ip_address]
The name argument defines the unique pinhole entry
name. The ip_address argument is the IP address of
the server on your LAN.
M11> set pinhole name web-server inter-
nal-ip 192.168.1.80
E Copyright Nokia Networks Oy
Management
5-89