Nokia M11 T66220 User Manual page 122

Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
C33833001SE_00
Set netmask to channels using PPP over ATM en-
capsulation in bridged mode
Assigns an IP network mask to the specified logical
ATM channel using ppp over ATM encapsulation in
bridged mode.
set ip wan {vccx} netmask [netmask]
The first argument identifies the ATM channel (vccx,
x = 1 ... 8). If there is only one ATM channel using ppp-
vcmux encapsulation, you can leave the argument
vccx out. The second argument is the netmask ad-
dress for that channel. If you enter 0.0.0.0 as the net-
mask, M11 will retrieve the netmask through the remote
peer using Dynamic Host Configuration Protocol.
M11> set ip wan vcc2 netmask 0.0.0.0
Enable/disable address mapping on channels
using PPP over ATM encapsulation in bridged
mode
Specifies whether you want M11 to use NAPT on the
specified ATM link using PPP over ATM encapsulation
in bridged mode (BNCP option on) when communicat-
ing with remote routers. Address mapping lets you hide
details of your network from remote routers. This is
useful when connecting to an Internet Service Provider.
set ip wan {vccx} addr-mapping [on|off]
The first argument identifies the ATM channel (vccx,
x = 1 ... 8). If there is only one ATM channel using ppp-
vcmux encapsulation, you can leave the argument
vccx out. The second argument is enables/disables
address mapping.
M11> set ip wan vcc2 addr-mapping off
E Copyright Nokia Networks Oy
Management
5-67