Nokia M11 T66220 User Manual page 83

Adsl
Table of Contents

Advertisement

Nokia M11 User's Manual
Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
5-28
Clear configuration settings
Clears the configuration settings of your M11. Issuing
the restart command after the clear command re-
stores the default configuration. clear command alone
clears the configuration and brings M11 into an unde-
fined state.
clear {yes}
If you do not use the optional yes argument, CLI
prompts you to confirm the clear command.
M11> clear yes
Download software update
Downloads a new version of the Nokia M11 operating
software from a TFTP (Trivial File Transfer Protocol)
server, validates the software image, and programs the
image into the Nokia M11 memory. After you install new
operating software, you must restart Nokia M11.
install [server_address] [filename] {confirm}
The TFTP server must be accessible on your Ethernet
network or through one of the active ATM virtual chan-
nels and a route to the server must exist. The server
address argument identifies the IP address of the
TFTP server on which your Nokia M11 operating soft-
ware is stored. The filename argument identifies the
path and name of the operating software file on the
TFTP server. If you include the optional confirm key-
word, you will not be prompted to identify a TFTP
server or file name. Your Nokia M11 begins the soft-
ware installation using its default boot settings.
M11> install 192.168.1.1 M11c_500.d39
*** WARNING *** YOU ARE ABOUT TO ERASE
AND REPROGRAM THE NOKIA M11'S PERMANENT
SOFTWARE STORAGE WITH A NEW SOFTWARE VER-
SION OBTAINED VIA THE TFTP PROTOCOL.
About to install new Flash EPROM software
image:
server: 192.168.1.1
file: "M11c_500.d39"
Do you wish to proceed? (type 'yes' to
confirm): yes
Installing
M11>
E Copyright Nokia Networks Oy
C33833001SE_00

Advertisement

Table of Contents
loading

This manual is also suitable for:

M11 t66220

Table of Contents