16. Enter static routes
Static route identifies a manually configured route to a remote
network. Unlike dynamic routes, which are acquired and
confirmed periodically from other routers, static routes do not time
out.
You can specify static routes by filling in the remote router's
destination address, net mask and gateway address. After you
have filled in the required information, click Add.
17. Save the configuration.
You must save the new configuration. Save command takes you to
the M11 home page.
18. Restart your M11.
You must restart your M11 by clicking Restart M11 for your
changes to take effect.
C33833001SE_00
E Copyright Nokia Networks Oy
Management
5-11