Nokia M11 T66220 User Manual page 85

Nokia M11 User's Manual
Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
Command
Description
Syntax
Arguments
Example
5-30
Ping
Causes the Nokia M11 to send a series of ICMP Echo
requests for the device with the specified IP address.
You can use the ping command to determine whether
an IP address is already in use on your network. You
cannot use the ping command to ping the Nokia M11's
own IP address. If a host using the specified IP address
is active, it returns one or more ICMP Echo replies,
confirming that it is accessible from your network.
ping [ip_address]
ip_address argument is the IP address, in dotted
decimal notation, of the device you want to locate.
M11> ping 192.122.12.11
ATM ping
Sends 5 OAM F5 loopback cells to the specified VPI/
VCI destination with a 5 second total timeout interval.
atmping [vpi] [vci] [segment | end-to-end]
vpi and vci specify the channel and the third argu-
ment specifies segment or end-to-end loopback.
M11> atmping 0 100 segment
Exit
Exits the Nokia M11 command line interface.
quit
None.
M11> quit
Reset ATM statistics
Resets ATM statistics to zero.
reset atm
None
M11> reset atm
E Copyright Nokia Networks Oy
C33833001SE_00