HP 4800G Series Configuration Manual page 773

24/48 port
Table of Contents

Advertisement

routing entry and a multicast forwarding entry for a multicast packet, the router sets the RPF interface of
the packet as the incoming interface of the (S, G) entry. Upon receiving an (S, G) multicast packet, the
router first searches its multicast forwarding table:
1)
If the corresponding (S, G) entry does not exist in the multicast forwarding table, the packet is
subject to an RPF check. The router creates a multicast routing entry based on the relevant routing
information and adds the entry into the multicast forwarding table, with the RPF interface as the
incoming interface.
If the interface on which the packet actually arrived is the RPF interface, the RPF check succeeds
and the router forwards the packet to all the outgoing interfaces.
If the interface on which the packet actually arrived is not the RPF interface, the RPF check fails
and the router discards the packet.
2)
If the corresponding (S, G) entry exists, and the interface on which the packet actually arrived is the
incoming interface, the router forwards the packet to all the outgoing interfaces.
3)
If the corresponding (S, G) entry exists, but the interface on which the packet actually arrived is not
the incoming interface in the multicast forwarding table, the multicast packet is subject to an RPF
check.
If the RPF interface is the incoming interface of the (S, G) entry, this means the (S, G) entry is
correct but the packet arrived from a wrong path. The packet is to be discarded.
If the RPF interface is not the incoming interface, this means the (S, G) entry has expired, and
router replaces the incoming interface with the RPF interface. If the interface on which the packet
arrived in the RPF interface, the router forwards the packet to all the outgoing interfaces; otherwise
it discards the packet.
Assume that unicast routes are available in the network, MBGP is not configured, and no multicast
static routes have been configured on Router C, as shown in
the SPT from the multicast source to the receivers. The multicast forwarding table on Router C contains
the (S, G) entry, with Vlan-interface 20 as the RPF interface.
Figure 1-1 RPF check process
When a multicast packet arrives on Vlan-interface 20 of Router C, as the interface is the incoming
interface of the (S, G) entry, the router forwards the packet to all outgoing interfaces.
When a multicast packet arrives on Vlan-interface 10 of Router C, as the interface is not the
incoming interface of the (S, G) entry, the router performs an RPF check on the packet: The router
searches its unicast routing table and finds that the outgoing interface to Source (the RPF interface)
Figure
1-1. Multicast packets travel along
1-3

Advertisement

Chapters

Table of Contents
loading

Table of Contents