HP 4800G Series Configuration Manual page 747

127.0.0.0/8
127.0.0.1/32
10.100.30.0/24
10.100.30.3/32
172.16.10.0/24
# For VPN2, perform the configurations similar to the above on MCE and PE to import the OSPF routing
information of VPN2 to the EBGP routing table. Configuration procedures are omitted here. Followed is
the result of the above configurations.
<PE> display ip routing-table vpn-instance vpn2
Routing Tables: vpn2
Destinations : 5
Destination/Mask
127.0.0.0/8
127.0.0.1/32
10.100.40.0/24
10.100.40.3/32
172.16.20.0/24
After the above configurations, MCE has imported the OSPF routing information of VPN1 and VPN2 to
the EBGP routing table of PE properly.
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
BGP 255 2
Routes : 5
Proto Pre Cost
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
BGP 255 2
2-21
127.0.0.1 InLoop0
127.0.0.1 InLoop0
10.100.10.3 Vlan2
127.0.0.1 InLoop0
10.100.10.2 Vlan2
NextHop Interface
127.0.0.1 InLoop0
127.0.0.1 InLoop0
10.100.20.3 Vlan3
127.0.0.1 InLoop0
10.100.20.2 Vlan3