VLAN 1 is the system default VLAN, which needs not to be created and cannot be removed, either.
The VLAN you created in the way described above is a static VLAN. On the switch, there are
dynamic VLANs which are registered through GVRP. For details, refer to "GVRP" part of this
manual.
When you use the vlan command to create VLANs, if the destination VLAN is an existing dynamic
VLAN, it will be transformed into a static VLAN and the switch will output the prompt information.
Basic VLAN Interface Configuration
Configuration prerequisites
Before configuring a VLAN interface, create the corresponding VLAN.
Configuration procedure
Follow these steps to perform basic VLAN interface configuration:
To do...
Enter system view
Create a VLAN interface
and enter VLAN
interface view
Specify the description
string for the current
VLAN interface
Use the command...
system-view
interface Vlan-interface
vlan-id
description text
2-2
Remarks
—
Required
By default, there is no VLAN interface on a
switch.
Optional
By default, the description string of a VLAN
interface is the name of this VLAN
interface. Vlan-interface1 Interface for
example.