Hwtacacs Configuration Task List; Creating A Hwtacacs Scheme; Configuring Tacacs Authentication Servers - H3C S5100-SI Operation Manual

HWTACACS Configuration Task List

Complete the following tasks to configure HWTACACS:
Configuring the
TACACS client
Configuring the
TACACS server

Creating a HWTACACS Scheme

The HWTACACS protocol configuration is performed on a scheme basis. Therefore, you must create a
HWTACACS scheme and enter HWTACACS view before performing other configuration tasks.
Follow these steps to create a HWTACACS scheme:
To do...
Enter system view
Create a HWTACACS scheme
and enter its view
The system supports up to 16 HWTACACS schemes. You can delete a HWTACACS scheme only
when it is not referenced.

Configuring TACACS Authentication Servers

Follow these steps to configure TACACS authentication servers:
To do...
Enter system view
Create a HWTACACS scheme
and enter its view
Task
Creating a HWTACACS Scheme
Configuring TACACS Authentication Servers
Configuring TACACS Authorization Servers
Configuring TACACS Accounting Servers
Configuring Shared Keys for RADIUS Messages
Configuring the Attributes of Data to be Sent to TACACS
Servers
Configuring the Timers Regarding TACACS Servers
Refer to the configuration of TACACS servers.
Use the command...
system-view
hwtacacs scheme
hwtacacs-scheme-name
Use the command...
system-view
hwtacacs scheme
hwtacacs-scheme-name
2-21
Remarks
Required
Required
Required
Optional
Optional
Optional
Optional
—
Remarks
—
Required
By default, no HWTACACS
scheme exists.
Remarks
—
Required
By default, no HWTACACS
scheme exists.