Vlan-Vpn Configuration; Enabling The Vlan-Vpn Feature For A Port; Tpid Adjusting Configuration - H3C S5100-SI Operation Manual

802.1x

VLAN-VPN Configuration

Configuration Task List
Table 1-2 VLAN-VPN configuration tasks

Enabling the VLAN-VPN Feature for a Port

TPID Adjusting Configuration

Enabling the VLAN-VPN Feature for a Port
Configuration Prerequisites
The port is not a VLAN-VPN uplink port.
The port is not a remote mirror reflection port.
Configuration procedure
Table 1-3 Enable the VLAN-VPN feature for a port
Operation
Enter system view
Enter Ethernet port
view
Enable the VLAN-VPN
feature on the port
TPID Adjusting Configuration
Configuration Prerequisites
To change the global TPID value 0x8100, you need to specify a port on the device as a VLAN VPN
uplink port. Before the configuration, make sure that VLAN VPN is disabled on the port.
For proper packet transmission, confirm the TPID value of the peer device in the public network
before adjusting the TPID value.
Configuration Procedure
Table 1-4 Adjust the TPID value for VLAN-VPN packets on a port
Operation
Enter system view
Protocol type
Task
Command
system-view
interface interface-type
interface-number
vlan-vpn enable
system-view
0x888E
Required
Optional
—
—
Required
By default, the VLAN-VPN feature is
disabled on a port.
Command
1-3
Value
Remarks
Description
Description
—