H3C S5100-SI Operation Manual page 600

In the Host Name (or IP address) text box, enter the IP address of the server. Note that there must be
a route available between the IP address of the server and the client.
Selecting a protocol for remote connection
As shown in Figure 1-8, select SSH under Protocol.
Selecting an SSH version
From the category on the left pane of the window, select SSH under Connection. The window as
shown in Figure 1-9 appears.
Figure 1-9 SSH client configuration interface 2
Under Protocol options, select 2 from Preferred SSH protocol version.
Some SSH client software, for example, Tectia client software, supports the DES algorithm only when
the ssh1 version is selected. The PuTTY client software supports DES algorithm negotiation ssh2.
Opening an SSH connection with password authentication
From the window shown in
enter the username and password.
Enter the username and password to establish an SSH connection.
To log out, enter the quit command.
Figure 1-9, click Open. If the connection is normal, you will be prompted to
1-19