Configuring Monitor Link; Creating A Monitor Link Group; Configuring The Uplink Port - H3C S5100-SI Operation Manual

Configuring Monitor Link

Before configuring a monitor link group, you must create a monitor link group and configure member
ports for it. A monitor link group consists of an uplink port and one or multiple downlink ports. The uplink
port can be a manually-configured or static LACP link aggregation group, an Ethernet port, or a smart
link group. The downlink ports can be manually-configured link aggregation groups or static LACP link
aggregation groups, or Ethernet ports.
Configuration Task List
Complete the following tasks to configure Monitor Link:

Creating a Monitor Link Group

Configuring the Uplink Port

Configuring a Downlink Port
Creating a Monitor Link Group
Follow these steps to create a monitor link group:
To do...
Enter system view
Create a monitor link group
Configuring the Uplink Port
Follow these steps to configure the uplink port:
Enter system view
Enter the specified monitor link group view
Configure the
uplink port for
the monitor
link group
Task
system-view
monitor-link group group-id
To do...
Configure the specified link
aggregation group as the
uplink port of the monitor link
group
Configure the specified smart
link group as the uplink port of
the monitor link group
Required
Required
Required
Use the command...
Use the command...
system-view
monitor-link group group-id
link-aggregation group
group-id uplink
smart-link group group-id
uplink
2-3
Remarks
Remarks
—
Required
Remarks
—
—
Required
Use any of the
three
approaches