H3C S5100-SI Operation Manual page 54

View Available operation
SFTP client Configure SFTP client
view parameters
MST region Configure MST region
view parameters
Configure cluster
Cluster view
parameters
Configure the RSA
public key for SSH
users
Public key
view
Configure the RSA or
DSA public key for
SSH users
Edit the RSA public
key for SSH users
Public key
Edit the RSA or DSA
editing view
public key for SSH
users
Define rules for a
Basic ACL
basic ACL (with ID
view ranging from 2000 to
2999)
Define rules for an
Advanced advanced ACL (with
ACL view ID ranging from 3000
to 3999)
Define rules for an
layer 2 ACL (with ID
ranging from 4000 to
Layer 2 ACL
4999)
view
Only S5100-EI series
Ethernet switches
provide this view
Define QoS profile
QoS profile
Only S5100-EI series
view
Ethernet switches
provide this view
RADIUS Configure RADIUS
scheme view scheme parameters
ISP domain Configure ISP domain
view parameters
HWPing test Configure HWPing
group view test group parameters
Prompt example Enter method
Execute the sftp
sftp-client> command in
system view.
Execute the stp
[Sysname-mst-re region-configurati
gion] on command in
system view.
Execute the
[Sysname-cluster
cluster command
]
in system view.
Execute the rsa
[Sysname-rsa-pu peer-public-key
blic-key] command in
system view.
Execute the
[Sysname-peer-p
public-key peer
ublic-key]
command in
system view.
[Sysname-rsa-ke
y-code] Execute the
public-key-code
begin command in
[Sysname-peer-k
public key view.
ey-code]
Execute the acl
[Sysname-acl-
number command
basic-2000]
in system view.
Execute the acl
[Sysname-acl-ad
number command
v-3000]
in system view.
Execute the acl
[Sysname-acl-eth
number command
ernetframe-4000]
in system view.
Execute the
[Sysname-qos-pr
qos-profile
ofile-a123] command in
system view.
Execute the radius
[Sysname-radius
scheme command
-1]
in system view.
Execute the
[Sysname-isp-aa
domain command
a123.net]
in system view.
Execute the
[Sysname-hwpin
hwping command
g-a123-a123]
in system view.
5-6
Quit method
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.
Execute the
peer-public-ke
y end
command to
return to system
view.
Execute the
public-key-cod
e end
command to
return to public
key view.
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.