Troubleshooting Ipv6 Application; Unable To Ping A Remote Destination - H3C S5100-SI Operation Manual

bytes=56 Sequence=1 hop limit=64
Reply from 3003::1
bytes=56 Sequence=2 hop limit=64
Reply from 3003::1
bytes=56 Sequence=3 hop limit=64
Reply from 3003::1
bytes=56 Sequence=4 hop limit=64
Reply from 3003::1
bytes=56 Sequence=5 hop limit=64
--- 3003::1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 31/46/110 ms
# On SWA, configure static routes to SWC, the Telnet Server, and the TFTP Server.
<SWA> system-view
[SWA] ipv6 route-static 3002:: 64 3003::1
[SWA] ipv6 route-static 3001:: 64 3003::1
[SWA] quit
# Trace the IPv6 route from SWA to SWC.
<SWA> tracert ipv6 3002::1
traceroute to 3002::1
1 3003::1 30 ms
2 3002::1 10 ms 10 ms 0 ms
# SWA downloads a file from TFTP server 3001::3.
<SWA> tftp ipv6 3001::3 get filetoget flash:/filegothere
.
File will be transferred in binary mode
Downloading file from remote tftp server, please wait....
TFTP: 13 bytes received in 1.243 second(s)
File downloaded successfully.
# SWA Connect to Telnet server 3001::2.
<SWA> telnet ipv6 3001::2
Trying 3001::2...
Press CTRL+K to abort
Connected to 3001::2 ...
Telnet Server>

Troubleshooting IPv6 Application

Unable to Ping a Remote Destination

Symptom
Unable to ping a remote destination and return an error message.
time = 110 ms
time = 31 ms
time = 31 ms
time = 31 ms
time = 31 ms
30 hops max,60 bytes packet
0 ms 0 ms
2-5