Dns Test - H3C S5100-SI Operation Manual

[Sysname-hwping-administrator-udpprivate] destination-ip 10.2.2.2
# Configure the destination port on the HWPing server.
[Sysname-hwping-administrator-udpprivate] destination-port 8000
# Configure to make 10 probes per test.
[Sysname-hwping-administrator-udpprivate] count 10
# Set the probe timeout time to 5 seconds.
[Sysname-hwping-administrator-udpprivate] timeout 5
# Start the test.
[Sysname-hwping-administrator-udpprivate] test-enable
# Display test results.
[Sysname-hwping-administrator-udpprivate] display hwping results administrator udpprivate
HWPing entry(admin administrator, tag udpprivate) test result:
Destination ip address:10.2.2.2
Send operation times: 10
Min/Max/Average Round Trip Time: 10/12/10
Square-Sum of Round Trip Time: 1170
Last complete test time: 2000-4-2 8:29:45.5
Extend result:
SD Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0
System busy operation number: 0
Operation sequence errors: 0
Other operation errors: 0
[Sysname-hwping-administrator-udpprivate] display hwping history administrator udpprivate
HWPing entry(admin administrator, tag udpprivate) history record:
Index Response
1
2
3
4
5
6
7
8
9
10
For detailed output description, see the corresponding command manual.

DNS Test

Network requirements
An H3C S5100-SI/EI series Ethernet switch serves as the HWPing client, and a PC serves as the DNS
server. Perform a HWPing DNS test between the switch and the DNS server to test the time required
from the client sends a DNS request to it receives a resolution result from the DNS server.
Status LastRC
11 1
12 1
11 1
11 1
11 1
11 1
10 1
10 1
10 1
11 1
1-29
Receive response times: 10
DS Maximal delay: 0
Operation timeout number: 0
Connection fail number: 0
Drop operation number: 0
Time
0 2000-04-02 08:29:45.5
0 2000-04-02 08:29:45.4
0 2000-04-02 08:29:45.4
0 2000-04-02 08:29:45.4
0 2000-04-02 08:29:45.4
0 2000-04-02 08:29:45.4
0 2000-04-02 08:29:45.3
0 2000-04-02 08:29:45.3
0 2000-04-02 08:29:45.3
0 2000-04-02 08:29:45.3