and 40; using SP for scheduling queue 6 and queue 7. Display queue scheduling
configuration information after the configuration.
<Sysname> system-view
[Sysname] queue-scheduler wrr group1 3 20 4 20 5 30 group2 0 20 1 20 2 40
[Sysname] display queue-scheduler
QID:
scheduling-group
-----------------------------------
0 :
wrr , group2
1 :
wrr , group2
2 :
wrr , group2
3 :
wrr , group1
4 :
wrr , group1
5 :
wrr , group1
6 :
sp
7 :
sp
Configuring Traffic Accounting
Refer to
Flow-Based Traffic Accounting
This feature is available only on the H3C S5100-EI series switches.
Configuration prerequisites
The ACL rules for traffic classification have been defined. Refer to the ACL module of this
manual for information about defining ACL rules.
Configuration procedures
You can collect/clear traffic statistics about incoming ACL matching packets globally, in a
VLAN, in a port group, or on a port.
1) Configuring traffic accounting globally
Follow these steps to collect/clear statistics about the incoming ACL matching packets
globally:
To do...
Enter system view
Collect statistics of the
packets matching a specific
ACL rule
weight
20
20
40
20
20
30
0
0
for information about traffic accounting.
Use the command...
system-view
traffic-statistic inbound
acl-rule
1-37
Remarks
—
Required