H3C S5100-SI Operation Manual page 770
Ethernet switches
Hide thumbs
Also See for H3C S5100-SI:
- Operation manual (934 pages) ,
- Installation manual (104 pages) ,
- Quick start manual (78 pages)
Table of Contents
Advertisement
<SwitchC> system-view
# Enable the function of processing flush messages received from VLAN 1 on GigabitEthernet 1/0/2.
<SwitchC> smart-link flush enable control-vlan 1 port GigabitEthernet 1/0/2
3)
Enable the function of processing flush messages received from VLAN 1 on Switch D.
# Enter system view.
<SwitchD> system-view
# Enable the function of processing flush messages received from VLAN 1 on GigabitEthernet 1/0/2.
[SwitchD] smart-link flush enable control-vlan 1 port GigabitEthernet 1/0/2
4)
Enable the function of processing flush messages received from VLAN 1 on Switch E.
# Enter system view.
<SwitchE> system-view
# Enable the function of processing flush messages received from VLAN 1 on GigabitEthernet 1/0/2
and GigabitEthernet 1/0/3.
[SwitchE]
smart-link
GigabitEthernet 1/0/3
flush
enable
control-vlan
1-8
1
port
GigabitEthernet
1/0/2
to
Advertisement
Chapters
Table of Contents
Troubleshooting
