Device Management - H3C S5100-SI Operation Manual

4

Device Management

When configuring device management, go to these sections for information you are interested in:
Introduction to Device Management
Device Management Configuration
Displaying the Device Management Configuration
Remote Switch APP Upgrade Configuration Example
Introduction to Device Management
Device Management includes the following:
Reboot the Ethernet switch
Configure real-time monitoring of the running status of the system
Specify the APP to be used at the next reboot
Update the Boot ROM
Identifying and Diagnosing Pluggable Transceivers
Device Management Configuration
Device Management Configuration Task list
Complete the following tasks to configure device management:
Rebooting the Ethernet Switch
Scheduling a Reboot on the Switch
Configuring Real-time Monitoring of the Running Status of the System
Specifying the APP to be Used at Reboot
Upgrading the Boot ROM
Identifying and Diagnosing Pluggable Transceivers
Rebooting the Ethernet Switch
You can perform the following operation in user view when the switch is faulty or needs to be rebooted.
Before rebooting, the system checks whether there is any configuration change. If yes, it prompts
whether or not to proceed. This prevents the system from losing the configurations in case of shutting
down the system without saving the configurations
Task
4-1
Remarks
Optional
Optional
Optional
Optional
Optional
Optional