H3C S5100-SI Operation Manual page 737

To do...
Enable the HWPing client
function
Create a HWPing test group
and enter its view
Configure the source IP
address
Configure the test type
Configure the number of
probes per test
Configure the maximum
number of history records that
can be saved
Configure the automatic test
interval
Configure the probe timeout
time
Configure the type of service
Configure the domain name to
be resolved
Configure the IP address of the
DNS server
Start the test
Display test results
Configuring HWPing client to send Trap messages
Trap messages are generated regardless of whether the HWPing test succeeds or fails. You can
specify whether to output Trap messages by enabling/disabling Trap sending.
Follow these steps to configure the HWPing client to send Trap messages:
Use the command...
hwping-agent enable
hwping administrator-name
operation- tag
source-ip ip-address
test-type dns
count times
history-records number
frequency interval
timeout time
tos value
dns resolve-target
domain-name
dns-server ip-address
test-enable
display hwping results
[ admin-name operation-tag ]
1-14
Remarks
Required
By default, the HWPing client
function is disabled.
Required
By default, no test group is
configured.
Optional
By default, no source IP
address is specified.
Required
By default, the test type is
ICMP.
Optional
By default, one probe is made
per test.
Optional
By default, the maximum
number is 50.
Optional
By default, the automatic test
interval is zero seconds,
indicating no automatic test will
be made.
Optional
By default, a probe times out in
three seconds.
Optional
By default, the service type is
zero.
Required
By default, the domain name to
be resolved by DNS is not
specified.
Required
By default, no DNS server
address is configured.
Required
Required
The display command can be
executed in any view.