H3C S5100-SI Operation Manual page 367

# Enable IP filtering on GigabitEthernet 1/0/2, GigabitEthernet 1/0/3, and GigabitEthernet 1/0/4 to filter
packets based on the source IP addresses/MAC addresses.
[Switch] interface GigabitEthernet1/0/2
[Switch-GigabitEthernet1/0/2] ip check source ip-address mac-address
[Switch-GigabitEthernet1/0/2] quit
[Switch] interface GigabitEthernet1/0/3
[Switch-GigabitEthernet1/0/3] ip check source ip-address mac-address
[Switch-GigabitEthernet1/0/3] quit
[Switch] interface GigabitEthernet1/0/4
[Switch-GigabitEthernet1/0/4] ip check source ip-address mac-address
[Switch-GigabitEthernet1/0/4] quit
# Create static binding entries on GigabitEthernet 1/0/2 of the switch.
[Switch] interface GigabitEthernet1/0/2
[Switch-GigabitEthernet1/0/2] ip source static binding ip-address 1.1.1.1 mac-address
0001-0001-0001
3-13