Configuring A Smart Link Device - H3C S5100-SI Operation Manual

Configuring a Smart Link
Device
Configuring Associated
Devices

Configuring a Smart Link Device

A Smart Link device refers to a device on which Smart Link is enabled and a smart link group is
configured, and that sends flush messages from the specified control VLAN. A member port of a smart
link group can be either an Ethernet port or a manually-configured or static LACP aggregation group.
You can configure a port or a link aggregation group as a member of a smart link group.
Follow these steps to configure Smart Link (with ports as the members of the smart link group):
To do...
Enter system view
Create a smart link group and
enter smart link group view
Enable the function of sending
flush messages in the
specified control VLAN
Configure a
port as a
smart link
group
member
Follow these steps to configure Smart Link (with link aggregation groups are the members of the smart
link group):
To do...
Enter system view
Create a smart link group and
enter smart link group view
Configure a link aggregation
group as a member of the
smart link group
Task
Create a smart link group
Add member ports to the smart link group
Enable the function of sending flush messages in
the specified control VLAN
Enable the function of processing flush
messages received from the specified control
VLAN
system-view
smart-link group group-id
flush enable control-vlan vlan-id
smart link port interface-type interface-number
group view { master | slave }
quit
interface interface-type interface-number
Ethernet port
view
port smart-link group group-id { master |
slave }
system-view
smart-link group group-id
link-aggregation group
group-id { master | slave }
Use the command...
Use the command...
1-4
Remarks
Required
Required
Remarks
—
Required
Required
By default, no
control VLAN for
sending flush
messages is
specified.
Required
Use either approach
Remarks
—
Required
Optional