H3C S5100-SI Operation Manual page 734

To do...
Configure the automatic test
interval
Configure the probe timeout
time
Configure the type of service
Start the test
Display test results
7) Configuring TCP test on HWPing client
Follow these steps to configure TCP test on HWPing client:
To do...
Enter system view
Enable the HWPing
client function
Create a HWPing test
group and enter its
view
Configure the
destination address
Configure the
destination port
Configure the source
IP address
Use the command...
frequency interval
timeout time
tos value
test-enable
display hwping results
[ admin-name operation-tag ]
Use the command...
system-view
hwping-agent enable
hwping
administrator-name
operation- tag
destination-ip
ip-address
destination-port
port-number
source-ip ip-address
1-11
Optional
By default, the automatic test
interval is zero seconds,
indicating no automatic test will
be made.
Optional
By default, a probe times out in
three seconds.
Optional
By default, the service type is
zero.
Required
Required
You can execute the command
in any view.
Remarks
—
Required
By default, the HWPing client function is
disabled.
Required
By default, no test group is configured.
Required
This IP address and the one configured on the
HWPing server for listening services must be
the same.
By default, no destination address is
configured.
Required in a Tcpprivate test
A Tcppublic test is a TCP connection test on
port 7. Use the hwping-server tcpconnect
ip-address 7 command on the server to
configure the listening service port; otherwise
the test will fail. No port number needs to be
configured on the client; any destination port
number configured on the client will not take
effect.
By default, no destination port number is
configured.
Optional
By default, the source IP address is not
specified.
Remarks