Managing A Cluster Through The Management Device - H3C S5100-SI Operation Manual

Enabling NTDP globally and on a specific port
Table 2-15 Enable NTDP globally and a specific port
Operation
Enter system view
Enable NTDP globally
Enter Ethernet port view
Enable NTDP on the port
Enabling the cluster function
Table 2-16 Enable the cluster function
Operation
Enter system view
Enable the cluster function
globally
Accessing the shared FTP/TFTP server from a member device
Perform the following operations in user view on a member device.
Table 2-17 Access the shared FTP/TFTP server from a member device
Access the shared FTP server of the
cluster
Download a file from the shared TFTP
server of the cluster
Upload a file to the shared TFTP server of
the cluster

Managing a Cluster through the Management Device

You can manage the member devices through the management device, for example, adding/removing
a cluster member, rebooting a member device, logging into a member device, and so on.
Table 2-18 Manage a cluster through management device
Operation
Enter system view
Enter cluster view
Configuring MAC address of
Management device
system-view
ntdp enable
interface interface-type
interface-number
ntdp enable
system-view
cluster enable
Operation
system-view
cluster
administrator-address
mac-address name name
Command
Command
Command
ftp cluster
tftp cluster get source-file
[ destination-file ]
tftp cluster put source-file
[ destination-file ]
Command
2-15
Description
—
Required
—
Required
Description
—
Optional
By default, the cluster function
is enabled.
Description
Optional
Optional
Optional
Description
—
—
Optional