Operator Panel; Various Ways To; Daily Care; Replacing The - Fujitsu fi-7160 Operator's Manual

Chapter 4 How to Use the Operator Panel
Item
13: Paper Select a paper protection detection method.
Protection This function can be set to reduce the risk of having
the documents damaged by detecting anomalies
upon feeding the documents and stopping the scan
when:
The scanner detects a document that is
unusually warped when a feeding error occurs.
The scanner detects paper jam noise
The scanner either detects a document that is
usually warped when a feeding error occurs or
detects paper jam noise
Specify the sensitivity level to detect anomalies
upon feeding the documents when paper protection
is used.
Documents are deformed (e.g. warped, bent,
creased) or paper jam noise is made when
documents are not being fed by the rollers properly.
To detect such symptoms and stop the scan, select
[1: Low] to only detect documents that are highly
deformed or loud paper jam noise. To detect
documents that are slightly deformed or small paper
jam noise, select [3: High].
You can also configure the paper protection
detection method from the scanner driver or the
Software Operation Panel. When the operation
panel setting is prioritized, the operator panel
setting is prioritized over the Software Operation
Panel setting. Note that even if the operation panel
setting is prioritized, the scanner driver setting has
the highest priority.
You can also configure the sensitivity level to detect
warped documents and paper jam noise from the
Software Operation Panel. When the operation
panel setting is prioritized, the operator panel
setting is prioritized over the Software Operation
Panel setting.
Description
1: Disable
2: Feeding accuracy
3: Feeding noise
4: Feeding accuracy and noise
Sensitivity for feeding accuracy
1: Low
2: Normal
3: High
Sensitivity for feeding noise
1: Low
2: Normal
3: High
Parameter (*1)/Value
-: No settings/values
TOP
Contents
Factory
Index
Default (*2)
Introduction
2: Feeding Scanner
accuracy
Overview
How to Load
Sensitivity
for feeding
Documents
accuracy:
2: Normal
Configuring the
Scan Settings
Sensitivity
for feeding
How to Use the
noise:

Operator Panel

2: Normal

Various Ways to

Scan

Daily Care

Replacing the

Consumables

Troubleshooting
Operational
Settings
Appendix
Glossary
80