Cleaning Materials And Locations That Require Cleaning; Configuring The; Scan Settings; How To Use The - Fujitsu fi-7160 Operator's Manual

Chapter 6 Daily Care

6.1 Cleaning Materials and Locations that Require Cleaning

Cleaning Materials
Name Part No.
Cleaner F1 PA03950-
0352
Cleaning Paper CA99501-
0012
Cleaning Wipe PA03950-
0419
Cotton swab Commercially available
Dry cloth
ATTENTION
In order to use the cleaning materials safely and correctly, read the
precautions on each product thoroughly.
For more information about the cleaning materials, contact
your FUJITSU scanner dealer or an authorized FUJITSU
scanner service provider.
Notes
100 ml
Moisten a cloth or Cleaning
Paper with this liquid to
wipe the scanner clean.
It may take a long time to
dry if an excessive amount
is used. Use it in small
quantity. Wipe off the
cleaner completely to leave
no residue on the cleaned
parts.
10 sheets
Use this non-woven sheet
with Cleaner F1.
24 packets
Pre-moistened with Cleaner F1.
It can be used instead of
moistening a cloth with Cleaner
F1.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents

Configuring the

Scan Settings

How to Use the

Operator Panel

Various Ways to

Scan

Daily Care

Replacing the

Consumables

Troubleshooting
Operational
Settings
Appendix
Glossary
109