Fujitsu fi-7160 Operator's Manual page 151

Chapter 8 Troubleshooting
No (continued)
Is the sensitivity level for paper protection set to high in the
operator panel or the Software Operation Panel?
No
*1: "Consumables" refers to the brake roller and the pick roller.
Set the sensitivity level for paper protection to low in either of the following ways:
Select [13: Paper Protection] in the [Settings Menu] screen on the operator
Yes
panel, and select [1: Low] for the sensitivity to detect either warped documents
or paper jam noise.
For details, refer to "4.2 Settings Menu" (page
Select [Paper Protection Sensitivity] on the Software Operation Panel, and
select [Low] for the sensitivity level to detect either warped documents or paper
jam noise.
For details, refer to "Specifying the Sensitivity Level for Paper Protection [Paper
Protection Sensitivity]" (page
If the problem persists, check the items in
Service Provider" (page 159)
an authorized FUJITSU scanner service provider.
66).
192).
"8.4 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
151