The Carrier Sheet Is Not Fed Smoothly. / Paper Jams Occur - Fujitsu fi-7160 Operator's Manual

Chapter 8 Troubleshooting
The Carrier Sheet is not fed smoothly. / Paper
jams occur.
Did you scan just the Carrier Sheet continuously?
No
Is the Carrier Sheet clean?
Yes
Did you start the scan after loading the Carrier Sheet in the
ADF paper chute (feeder)?
Yes
Are the glass and rollers inside the ADF clean?
Yes
Are the consumables (*1) worn out?
No
Is there any foreign matter inside the ADF?
No
Feed about 50 sheets of PPC paper (recycled paper) before scanning with the
Carrier Sheet.
Yes
The PPC paper can either be blank or printed.
Perform one of the following.
Clean the Carrier Sheet.
No
For details, refer to "Chapter 6 Daily Care" (page
Replace the Carrier Sheet.
For information on purchasing the Carrier Sheet, refer to
(page 214).
Start the scan after loading the Carrier Sheet in the ADF paper chute (feeder).
For details, refer to "Documents Larger than A4/Letter Size" (page 89)
No
"Scanning Photographs and Clippings" (page
Perform cleaning.
For details, refer to "Chapter 6 Daily Care" (page
No
Check the consumable counters and replace them if necessary.
For details, refer to "Chapter 7 Replacing the Consumables" (page
Yes
Clean the ADF. If there is any foreign matter in the ADF, remove it.
For details, refer to "Chapter 6 Daily Care" (page
Yes
108).
"Scanner Options"
or
91).
108).
119).
108).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
156