Table of Contents
Advertisement
Chapter 1 Scanner Overview
1.2 Parts and Functions
This section shows the names of the scanner parts.
Front
ADF Paper Chute (Feeder)
Holds the documents to be scanned.
Side Guides
Positions the documents in place when the
documents are loaded in the ADF paper chute
(feeder) as they are fed into the scanner.
ADF Cover
Open this to replace consumables or to
clean the inside of the scanner.
ADF
(Automatic Document Feeder)
Pulls and feeds the documents one sheet at a
time from the ADF paper chute (feeder).
Open this to replace consumables or to clean the
inside of the scanner.
Flatbed
When you scan a document that cannot be
scanned with the ADF, such as thin paper or a thick
document such as a book, place the document on
the glass section.
Chute Extension
Pull this out to adjust to the document length.
Stopper
Lift this up if needed.
Stacker
Stacks up the ejected documents.
Operator Panel
Consists of buttons and an LED indicator.
Can be used to operate the scanner or
check the status.
For details, refer to
"Chapter 3 How to Use
the Operator Panel" (page
39).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
14
Advertisement
Table of Contents
