Cleaning The Flatbed (Fi-7260/Fi-7280); Configuring The; Scan Settings; How To Use The - Fujitsu fi-7160 Operator's Manual

Chapter 6 Daily Care

Cleaning the Flatbed (fi-7260/fi-7280)

The flatbed should be cleaned with a piece of cloth moistened
with Cleaner F1, or a sheet of Cleaning Wipe.
1
Open the document cover.
For details, refer to "1.5 Opening/Closing the Document Cover (fi-
7260/fi-7280)" (page 28).
2
Clean the following locations with a cloth moistened with
Cleaner F1 or a sheet of Cleaning Wipe.
Document pad
Plastic frame
ATTENTION
Be careful not to let the cleaner in between the document bed and
the plastic frame.
3
Wait for the cleaned parts to dry.
4
Close the document cover.
For details, refer to "1.5 Opening/Closing the Document Cover (fi-
7260/fi-7280)" (page 28).
Document
bed
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents

Configuring the

Scan Settings

How to Use the

Operator Panel

Various Ways to

Scan

Daily Care

Replacing the

Consumables

Troubleshooting
Operational
Settings
Appendix
Glossary
117