Fujitsu fi-7160 Operator's Manual page 101

Chapter 5 Various Ways to Scan
6
Select an action and an application to be launched by the
scanner button event.
Click [Start this program] under [Actions], and select an application
from the drop-down list on the right.
7
Click the [OK] button.
The setup of the computer is completed. Proceed to configure the
scanner settings.
HINT
To configure multiple events, repeat steps
Scanner setup
1
2
4 to 7.
[ ]/[ ] Button
[Scan/Enter] Button
Press the [ ] or [ ] button in the [Ready] screen of the
operator panel.
The [Function Selection] screen is displayed.
Press the [ ] or [ ] button and select a parameter, then
press the [Scan/Enter] button to confirm.
Configure the application you want to launch when you press the
[Scan/Enter] button in the [Ready] screen.
Parameters in the [Function Selection] screen, application numbers in
the indicator, and events configured on the computer correspond one
another as follows.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
101