1.3 Basic Operations of the Operator
Panel
This basic operation include how to enter setup mode and test mode.
■ Clearing errors
When an user recoverable error occurs, Check LED blinks to alarm you and the
error message is displayed on the LCD. Here is an example of an error message.
Press
button to clear the blinking after the cause of the error is removed.
ATTENTION
6
1.3 Basic Operations of the Operator Panel
D
You can not clear errors with Check LED lit. They are not user
recoverable and Check LED stays lit.
Refer to "Appendix 3 Messages of Operator Panel", "Error mes-
sage (Temporary error)" on page AP-7 for the messages.
o
u
b
l
e
F
e
e
d