Removing Shadows/Streaks That Appear Around The Scanned Image [Page Edge Filler (Adf - Fujitsu fi-7160 Operator's Manual

Chapter 9 Operational Settings
Vertical
magnification
Adjustment
Unit Select [Flat bed] (*1) or [ADF] as the target for
vertical magnification adjustment.
Vertical Adjusts the vertical (length) magnification.
magnification The value can range from -3.1 to +3.1% (in
Adjustment increments of 0.1).
(Sub: length)
*1: Displayed when using fi-7260 or fi-7280.
Description
Removing Shadows/Streaks that Appear around
the Scanned Image
[Page Edge Filler (ADF)]/[Page Edge Filler (FB)]
(fi-7260/fi-7280)
Depending on the condition of the documents that you scan,
the shadow of the document may appear as black streaks.
In that case, you can improve the image quality around the
edges of the document by using the "Page Edge Filler"
function to fill in the edges.
1
Start up the Software Operation Panel.
For details, refer to "9.1 Starting Up the Software Operation Panel"
(page 163).
2
From the listing on the left, select [Device Setting 2]
[Page Edge Filler (ADF)] or [Page Edge Filler (FB)].
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
184