Consumables And Replacement Cycles - Fujitsu fi-7160 Operator's Manual

Chapter 7 Replacing the Consumables

7.1 Consumables and Replacement Cycles

The following table shows the consumables used for the
scanner.
Name Part No.
BRAKE ROLLER PA03670-
0001
PICK ROLLER PA03670-
0002
Suggested replacement cycle
200,000 sheets or one year
200,000 sheets or one year
Consumables need to be replaced periodically. It is
recommended that you keep a stock of new consumables and
replace them before it reaches the end of the consumable life.
The scanner records the number of sheets scanned after
replacing the consumables (brake roller/pick roller), which
allows you to check the status on each consumable.
For details, refer to "9.4 Settings Related to Sheet Counters"
(page 178).
Note that the suggested replacement cycles are guidelines for
2
using A4 (80 g/m [20 lb]) wood-free or wood-containing
paper, as these cycles vary depending on the type of
documents scanned and how often the scanner is used and
cleaned.
Only use the specified consumables.
To purchase the consumables, contact your FUJITSU scanner
dealer or an authorized FUJITSU scanner service provider.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
120