Fujitsu fi-7160 Operator's Manual page 107

Chapter 5 Various Ways to Scan
4
Press the [Menu] button and confirm that the LCD
displays [Disable], and then either press the [Scan/Enter]
button or perform a scan from the computer.
From this point, note that the indication on the LCD switches between
[Enable] [Disable] every time you press the [Menu] button. When
[Disable] is displayed, the next document is scanned with paper
protection disabled. After that, the subsequent documents are
scanned according to the paper protection setting of either scanner
driver, Software Operation Panel, or operator panel.
HINT
If paper protection is set off frequently, refer to
set off frequently." (page 150).
"Paper protection is
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
107