Fi-7260/Fi-7280 - Fujitsu fi-7160 Operator's Manual

Chapter 1 Scanner Overview

fi-7260/fi-7280

■Front
Side guides
Guides the documents in width direction as
they are fed into the scanner.
ADF (Automatic Document Feeder)
Pulls and feeds the documents one sheet at a
time from the ADF paper chute (feeder).
Open to replace consumables or clean the
inside of the scanner.
Stopper
Lift up to adjust to the document length.
Stacker
Stacks up the ejected documents.
Transport lock switch
Locks the carrier unit (which is inside the
flatbed) to prevent damage during
transportation.
Flatbed
For scanning documents (e.g. thin paper,
books) that cannot be scanned with the ADF.
Chute extension 2
Pull out to adjust to the document length.
Chute extension 1
Pull out to adjust to the document length.
ADF paper chute (feeder)
Holds the documents to be scanned.
ADF release tab
Pull this tab to open the ADF.
Operator panel
Consists of an LCD, buttons, and LED
indicator.
Can be used to operate the scanner or
check the status.
For details, refer to "Chapter 4 How to Use
the Operator Panel" (page 61).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
20