Chapter 5 Various Ways to Scan
Scanning a Book (fi-7260/fi-7280)
1
Open the document cover.
For details, refer to
"1.5 Opening/Closing the Document Cover (fi-
7260/fi-7280)" (page
28).
2
Remove the document cover by pulling it out in the
direction of the arrow.
3
Load the document on the document bed.
Place the document face-down to align its top left-hand corner with
the reference point.
Reference
point
4
In the scanner driver, configure the scan settings for using
the flatbed.
For details, refer to the scanner driver's Help.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
95