Cropping The Image Boundary [Autocrop Boundary] - Fujitsu fi-7160 Operator's Manual

Chapter 9 Operational Settings
3
Specify the document feed speed.
Normal: Normal document feed speed
Slow: The document feed speed is slower than normal
ATTENTION
The total time for scanning is longer because the document feed
speed slows down.
HINT
This setting can also be configured in the operator panel.
Cropping the Image Boundary
[AutoCrop Boundary]
Some fractional data may be generated in the images in the
process of scanning. You can specify whether to include or
exclude such fractional data by using the "AutoCrop
Boundary" function.
1
Start up the Software Operation Panel.
For details, refer to "9.1 Starting Up the Software Operation Panel"
(page 163).
2
From the listing on the left, select [Device Setting 2]
[AutoCrop Boundary].
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
189