Chapter 1 Scanner Overview
1.3 Turning the Power ON/OFF
This section explains how to power on/off the scanner.
HINT
The method by which the scanner is powered on/off can be specified
from one of the following:
Press the [Power] button on the operator panel
Unplug the power cable then plug it back in
Have the scanner turn on/off in sync with the computer's power
For details, refer to
"Method of Turning the Scanner ON/OFF [Power
SW Control]" (page
203).
How to Turn the Power ON
1
Press the [Power] button on the operator panel.
The scanner is turned on, and the [Power] button lights in green.
During initialization, the following image is displayed on the LCD of
the operator panel.
The scanner is ready to scan when [Ready] is displayed.
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
[Power] Button
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
TOP
Contents
Index
Glossary
25