Did you perform a scan with grayscale or other scan
settings that do not simply "binarize" (output in black &
white)?
Yes
Are the glasses inside the ADF clean?
Yes
*1: The scanned image may differ from the original image significantly if you simply "binarize" (output in black & white) a picture or a photo. If possible, use a
scanner driver to configure grayscale or other scan settings that do not simply "binarize" (output in black & white), and then perform a scan.
Use a scanner driver to configure grayscale or other scan settings that do not
simply "binarize" (output in black & white), and then perform a scan. (*1)
No
Clean the inside of the ADF.
For details, refer to
"Chapter 6 Daily Care" (page
No
If the problem persists, check the items in
Service Provider" (page 159)
an authorized FUJITSU scanner service provider.
108).
"8.4 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or