Paper Jam - Fujitsu fi-7160 Operator's Manual

Image scanner
Hide thumbs Also See for fi-7160:
Table of Contents

Advertisement

Chapter 8 Troubleshooting

8.1 Paper Jam

When your document is jammed inside the scanner, remove
the document in the following procedure.
Do not use force to pull out the jammed
document, and make sure to open the ADF first.
Be careful not to touch any sharp parts upon
removing jammed documents.
Be careful not to get your accessories (e.g. ties,
necklaces) or hair caught inside the scanner.
The glass surface may become extremely hot
during operation.
1
Remove all documents from the ADF paper chute
(feeder).
2
Open the ADF.
For details, refer to
"1.4 Opening/Closing the ADF" (page
When opening, the ADF might close
accidentally. Be careful not to have your
fingers caught when the ADF closes.
3
Remove the jammed document.
ATTENTION
Make sure to check the documents and the paper path
thoroughly. Remove any metal objects such as staples and
27).
paper clips to prevent paper jams.
Be careful not to damage the glass surface and the guides
when removing documents with metal objects such as staples
or paper clips.
4
Close the ADF.
For details, refer to
"1.4 Opening/Closing the ADF" (page
Be careful not to have your fingers caught
when closing the ADF.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
27).
Troubleshooting
Operational
Settings
Appendix
Glossary
128

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fi-7260Fi-7180Fi-7280

Table of Contents