Scanner Cleaning Cycle [Cleaning Cycle]; Replacement Cycle Of Consumables [Life Counter Alarm Setting] - Fujitsu fi-7160 Operator's Manual

Chapter 9 Operational Settings

Scanner Cleaning Cycle [Cleaning Cycle]

The cleaning cycle for the scanner can be specified.
The background color of the cleaning counter (in [Device
Setting]) turns yellow when the page count after cleaning is
performed reaches 100% of the specified value.
You can also display a cleaning instruction message
1
Start up the Software Operation Panel.
For details, refer to "9.1 Starting Up the Software Operation Panel"
(page 163).
2
From the listing on the left, select [Device Setting 2]
[Cleaning Cycle].
3
Specify a value for the cleaning cycle.
The value can range from 1,000 to 255,000 sheets (in increments of
1,000).
Specify whether or not to display the cleaning instruction message.
Replacement Cycle of Consumables [Life
Counter Alarm Setting]
The replacement cycle for each consumable can be specified.
The background color of the brake roller/pick roller counter (in
[Device Setting]) changes to light yellow when the page count
(page 180).
after replacing the consumable reaches 95% of the value
specified here, and turns yellow when it reaches 100%.
A message that prompts consumable replacement
also appears.
1
Start up the Software Operation Panel.
For details, refer to
(page 163).
2
From the listing on the left, select [Device Setting 2]
Counter Alarm Setting].
"9.1 Starting Up the Software Operation Panel"
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
(page 180)
Configuring the
Scan Settings
How to Use the
Operator Panel
[Life
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
181